Green, Safe, Energy Saving
Mobile web site
Add: Shengang shenda Industrial Park of Jiangyin City, Jiangsu Province
E-mail: firstname.lastname@example.org / email@example.com
How to check the pumping failure?
1. The wet curtain fan submersible pump is burnt out. In general, submersible pumps are most likely to burn out when w
Generally speaking, the failure of the wet curtain fan is usually the following:
1. The wet curtain fan submersible pump is burnt out. In general, submersible pumps are most likely to burn out when water is scarce.
2. The wet curtain fan pump and outlet pipe interface are not tightened. If the submersible pump interface is not tightened with the outlet pipe interface, there will be a certain gap in the middle, which may lead to water pressure drop and too small amount of water.
3. The connection error between the wet curtain fan and water pump. If the pump line ends, it will lead to too little water.
How to solve and avoid these problems? Here are some Suggestions:
1. The interface between the pump and the outlet pipe must be tightened;
2. The pump wiring must be correct;
3. Check whether the pump is running properly, and if the water pump is found to be burnt, repair or replace the new pump in time.
How to solve these problems?
Finally, the root of the problem is the water pump. Because of the wet curtain fan submersible pump in the case of water easy to burn out, so if you want to completely avoid the occurrence of these situations, it is recommended that you use the foot pump, because of the high water pump has since water phase protection function, can be avoided due to shortage of water pump to burn out.